Netgear RND4000 RND4000 User Manual - Page 17
Global Network Settings, Hostname, Default Gateway - nas
UPC - 606449053272
View all Netgear RND4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Global Network Settings NETGEAR ReadyNAS User Guide Figure 1-9 Hostname The Hostname you specify is used to advertise the ReadyNAS on your network. You can use the hostname to address the ReadyNAS in place of the IP address when accessing the ReadyNAS from Windows, or over OS X using SMB. This is also the name that appears in the RAIDar scan list. The default hostname is nas- followed by the last three bytes of your primary MAC address. Default Gateway The Default Gateway specifies the IP address of the system where your network traffic is routed if the destination is outside your subnet. In most homes and smaller offices, this is the IP address of the router connected to the cable modem or your DSL service. If you selected the DHCP option in the Ethernet or Wireless tab, the Default Gateway field is automatically populated with the setting from your DHCP server. If you selected the Static option, you can manually specify the IP addresses of the default gateway server here. Configuring Your ReadyNAS 1-5 v1.0, October 2007