Netgear WG602 WG602v3 User Manual - Page 26
Apply, Setup, Wireless Settings., Wireless Network Name SSID., NETGEAR, SSID Broadcast, Enable - ap setup
UPC - 606449030730
View all Netgear WG602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual • Gateway: 0.0.0.0 If your network has a requirement to use a different IP addressing scheme, you can make those changes on this screen. Click Apply to save any changes. . Note: If you change the default subnet of the LAN IP address, you will be disconnected from the Wireless AP user interface. To reconnect, reconfigure your computer with a static IP address within the new LAN IP subnet. To configure your basic wireless settings: 1. From under the Setup menu, select Wireless Settings. The Wireless Settings screen will display. Figure 2-5 2. Enter or modify the wireless settings appropriate to your network: • Wireless Network Name (SSID). The SSID is the wireless network name. Enter a value of up to 32 alphanumeric characters; the characters are case sensitive. In a setting where more than one wireless network is present, using a different wireless network name allows your to separate the traffic. Any device you want to participate in a particular wireless network needs to use the SSID. The default SSID is: NETGEAR. • SSID Broadcast. If SSID Broadcast is disabled, only devices that have the correct SSID can connect. The default is Enable. 2-6 Installation and Configuration v1.0, August 2006