Netgear WG602 WG602v3 User Manual - Page 68

NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual Table A-1. Access Point Default Configuration Settings Feature Description Wireless Communication Wireless Network Name (SSID) Security Broadcast SSID Transmission Speed Country/Region RF Channel Operating Mode Data Rate Output Power Enabled NETGEAR Disabled Enabled Autoa United States (in North America; otherwise, varies by region) 11 until the region is selected 802.11b/802.11g Best Full Access Point Mode Access Point Wireless Card Access List MAC Address Filtering All wireless stations allowed Disabled WMM Support Disabled Spanning Tree Protocol Enabled a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Technical Specifications The following table lists the specifications for the WG602v3. Table A-2. Technical Specifications Parameter Radio Data Rates Frequency Data Encoding: Wireless Security: NETGEAR WG602v3 54 Mbps Wireless Access Point 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps Auto Rate Sensing 2.4-2.5Ghz Direct Sequence Spread Spectrum (DSSS) for 802.11b and Orthogonal Frequency Division Multiplexing (OFDM) for 802.11g WEP and WPA-PSK A-2 Default Configuration and Technical Specifications v1.0, August 2006