Netgear WG602 WG602v3 User Manual - Page 36
Configuring WEP Wireless Security, Setup, Security Settings, Security, Settings, Security Type - access point setup
UPC - 606449030730
View all Netgear WG602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
NETGEAR 54 Mbps Wireless Access Point WG602v3 Reference Manual Configuring WEP Wireless Security If you use a wireless PC to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired PC to make any further changes. To configure WEP data encryption: 1. From under the Setup menu in the left-hand panel, click Security Settings.The Security Settings screen will display. 2. From the Security Type pull-down menu, select WEP. Figure 2-12 3. From the Authentication Type pull-down menu, select either Mix or Shared Key to use WEP data encryption. 4. From the Encryption Strength pull-down menu, select either 64-bit or 128-bit encryption. 5. Program the four Security Encryption (WEB) Keys either manually or automatically. The values must be identical on all PCs and access points in your network. • Automatic - Enter a word or group of printable characters in the Passphrase box and click the Generate button. The four key boxes will be automatically populated with key values; Key 1 is the active key by default. • Manual - Enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F) Select which of the four keys will be active. 2-16 v1.0, August 2006 Installation and Configuration