Netgear WPN824v2 WPN824v1 Reference Manual - Page 133
Verifying TCP/IP Properties for Windows XP
View all Netgear WPN824v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Reference Manual for the RangeMax Wireless Router WPN824 • The TCP/IP Properties dialog box now displays. • Click the IP Address tab. • Select the radio button marked Obtain an IP address from a DHCP server. • Click OK. This completes the configuration of TCP/IP in Windows NT. Restart the PC. Repeat these steps for each PC with this version of Windows on your network. Verifying TCP/IP Properties for Windows XP, 2000, and NT4 To check your PC's TCP/IP configuration: 1. On the Windows taskbar, click the Start button, and then click Run. The Run window opens. 2. Type cmd and then click OK. A command window opens 3. Type ipconfig /all Your IP Configuration information will be listed, and should match the values below if you are using the default TCP/IP settings that NETGEAR recommends for connecting through a router or gateway: • The IP address is between 192.168.1.2 and 192.168.1.254 • The subnet mask is 255.255.255.0 Preparing Your Network 202-10072-01, March 2005 C-17