Netgear WPN824v2 WPN824v1 Reference Manual - Page 49
How to Restrict Wireless Access by MAC Address, admin, password, Advanced Wireless Setup - default settings
View all Netgear WPN824v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Reference Manual for the RangeMax Wireless Router WPN824 How to Restrict Wireless Access by MAC Address To restrict access based on MAC addresses, follow these steps: 1. Log in to the WPN824 firewall at its default LAN address of http://www.routerlogin.net with its default user name of admin and default password of password, or using whatever LAN address and password you have set up. Note: When configuring the firewall from a wireless computer whose MAC address is not in the Trusted PC list, if you select Turn Access Control On, you will lose your wireless connection when you click on Apply. You must then access the wireless router from a wired computer or from a wireless computer which is on the access control list to make any further changes. 2. Click Advanced Wireless Setup in the main menu of the WPN824 firewall. 3. From the Wireless Settings menu, click Setup Access List to display the Wireless Access menu shown below. Figure 4-8: Wireless Card Access List Setup Wireless Configuration 202-10072-01, March 2005 4-13