Netgear WPN824v2 WPN824v1 Reference Manual - Page 50
Turn Access Control On, Apply, Devices menu. - repeater
View all Netgear WPN824v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Reference Manual for the RangeMax Wireless Router WPN824 4. Click Add to add a wireless device to the wireless access control list. The Available Wireless Cards list displays. 5. Click the Turn Access Control On check box. 6. Then, either select from the list of available wireless cards the WPN824 has found in your area, or enter the MAC address and device name for a device you plan to use. You can usually find the MAC address printed on the wireless adapter. Note: You can copy and paste the MAC addresses from the firewall's Attached Devices menu into the MAC Address box of this menu. To do this, configure each wireless computer to obtain a wireless link to the firewall. The computer should then appear in the Attached Devices menu. 7. Click Add to add this wireless device to the Wireless Card Access List. The screen changes back to the list screen. Repeat these steps for each additional device you wish to add to the list. 8. Be sure to click Apply to save your wireless access control list settings. Now, only devices on this list will be allowed to wirelessly connect to the WPN824. 4-14 202-10072-01, March 2005 Wireless Configuration