Netgear WPN824v2 WPN824v1 Reference Manual - Page 89
Setting the MTU Size, Using the LAN IP Setup Options
View all Netgear WPN824v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Reference Manual for the RangeMax Wireless Router WPN824 Setting the MTU Size The normal MTU (Maximum Transmit Unit) value for most Ethernet networks is 1500 Bytes, 1492 Bytes for PPPoE connections, or 1436 for PPTP connections. For some ISPs you may need to reduce the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. Any packets sent through the router that are larger than the configured MTU size will be repackaged into smaller packets to meet the MTU requirement. To change the MTU size: 1. Under MTU Size, enter a new size between 64 and 1500. 2. Click Apply to save the new configuration. Using the LAN IP Setup Options Another feature category under the Advanced heading is LAN IP Setup. This menu allows configuration of LAN IP services such as DHCP and RIP. From the Main Menu of the browser interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup menu, shown below. Figure 8-9: LAN IP Setup Menu Advanced Configuration of the Router 202-10072-01, March 2005 8-13