Netgear WPN824v2 WPN824v1 Reference Manual - Page 21
The Router’s Rear Panel, WPN824 Rear Panel, Table 2-1., Status Light Descriptions - problems
View all Netgear WPN824v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Reference Manual for the RangeMax Wireless Router WPN824 You can use the status lights to verify connections. Viewed from left to right, the table below describes the lights on the front panel of the router. Table 2-1. Status Light Descriptions Label Activity Power Test Wireless On Green Solid Off On Off On Off Internet LAN On Blink On (Green) Blink (Green) On (Amber) Blink (Amber) Off Description Power is supplied and the router it has passed its diagnostic test. Power is not supplied to the router. The unit is performing the power on self test diagnostic. The unit successfully completed the power on self test diagnostic. The Wireless port is initialized and the wireless feature is enabled. The wireless feature is turned off or there is a problem. The Internet port has detected a link with an attached device. Data is being transmitted or received by the Internet port. The LAN (local area network) port has detected link with a 100 Mbps device. Data is being transmitted or received at 100 Mbps. The Local port has detected link with a 10 Mbps device. Data is being transmitted or received at 10 Mbps. No link is detected on this port. The Router's Rear Panel The rear panel of the WPN824 router contains the items listed below. LEDs to show which antenna is on 4321 Power 4 LAN Ports Figure 1-2: WPN824 Rear Panel Internet Port Reset Button Seven integrated antennas inside Introduction 2-7 202-10072-01, March 2005