Oki MC770 MC770/780 User Guide - Basic - Page 30
Continuous feed mode, Single feed mode, Align the side guides to the original length.
View all Oki MC770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
HOW TO MAKE COPIES 1 2 3 4 5 6 7 8 9 10 11 2 1 1 When black streaks appear If the scanning area or the guide area is dirty, image trouble such as black streaks may occur on printouts. Weekly cleaning of these areas is recommended. 2 Continuous feed mode The feeding mode is set at "continuous feed mode" by default. Once you set the originals and then press the [START] button, they are scanned page by page continuously. It is useful when you want to copy more than one original at one time. 1 Align all the originals. 3 Collate the originals in the order that you want them to be copied. The top sheet of the originals will be copied first. 2 Place the originals with their face up and align the side guides to the original length. Note • Regardless of their sizes, originals are acceptable up 4 to 100 sheets (35 to 80 g/m2 (9.3 to 20 lb.)) or 16 mm (0.62") in height. • For mixed-size originals, see the following page: P.45 "Copying mixed-size originals in one operation" 5 Memo • When there are too many originals to be scanned at one time, divide the originals into several sets before copying. Place the first set of the originals and then press [CONTINUE] on the touch panel while the data of this set are being scanned. When this scanning is finished, place the next set of the originals and press the [START] button on the control panel. (If you press [CONTINUE], this button may not work shortly before scanning is finished.) Single feed mode When the feeding mode is set at "single feed mode", an original is fed automatically as it is placed on the RADF. It is useful when you want to copy only 1 original sheet. 1 Align the side guides to the original length. 6 For long originals The original stopper prevents the scanned originals from falling off. Pull it out from the RADF and raise the sub- 2 Insert the original with its face up and straight along the side guides. stopper. The original is automatically pulled in and then the menu of step 3 will be displayed on the touch panel. Note • Lower the sub-stopper and slightly lift the original stopper to push it back in after you have finished using it. Note • Be sure to let go of the original when it starts being pulled. - 30 -