Oki MC770 MC770/780 User Guide - Basic - Page 43

● BASIC COPY MODES Before Using Copying Functions Default settings This equipment is under its "default settings" when the power is turned ON, namely, if no setting change has been applied yet, the equipment's settings return to the default ones when the energy saving mode is cleared or the [RESET] button on the control panel is pressed. The default settings for basic copy modes at installation are shown below. Item Default setting Reproduction ratio Copy quantity Paper selection 100% 1 Automatic Paper Selection (APS) Simplex/Duplex 1-sided original -> 1-sided copy Density adjustment Manual adjustment Color mode FULL COLOR Original mode TEXT/PHOTO Finishing mode Feeding mode when using the RADF When using the original glass: NON-SORT NON-STAPLE When using the RADF (Reversing Automatic Document Feeder): SORT Continuous feed mode The default settings are changeable. Confirming the set functions If you press [SETTINGS] on the touch panel, the menu shown below is displayed. On this menu, you can view the functions that are currently set. BASIC COPY MODES 1 Switching to the function setting menu To change the functions on the current menu, press the corresponding buttons. The desired setting menu will then 2 appear. Clearing the set functions If you want to clear any copy function setting, press [RESET] on the corresponding setting menu. 3 4 However, for FULL IMAGE on the EDIT menu, also press the highlighted button to clear the setting. 5 6 Clearing all settings changed When you press the [RESET] button on the control panel, all the function changes will be cleared. - 43 -