Oki MC770 MC770/780 User Guide - Basic - Page 64

SENDING/RECEIVING A FAX Precautions for using the RADF Do not use the following originals as they may misfeed or become damaged: (1) Badly wrinkled or folded originals. In (4) Clipped or stapled originals particular, originals whose leading edge are curled may fail to be fed. (2) Originals with carbon paper (5) Originals with holes or torn originals 1 (3) Taped, pasted or clipped (cut out) originals (6) Damp originals (7) OHP film originals The following originals should be handled carefully: 2 (1) Folded or curled originals should be smoothed out before being used. (2) Originals sticking to each other, or originals that are surface-treated may fail to separate properly. 3 Setting the transmission conditions You can set the fax transmission conditions. Memo • The transmission conditions are only applied to the current transmission. They return to the default settings after the 4 transmission. • Each default setting of resolution, original mode, exposure, transmission mode and ECM is adjustable.  Advanced Guide  Making settings Pressing [OPTION] on the fax screen will display the 5 transmission condition setting screen as shown below. Set each setting item, and then press [OK]. 6 • Press or to switch the pages. • To cancel the operation and return to the previous screen, press [RESET]. RESOLUTION Set the resolution based on the fineness of the original. STANDARD: This is suitable for an original with regular size text. FINE: This is suitable for an original with small size text and fine illustrations. U-FINE: This is suitable for an original with ultra-fine illustrations. Memo • If the recipient's fax machine is not capable of receiving originals at the same resolution, the resolution is automatically converted before being sent to the recipient. The higher the resolution is, the longer it takes to send an original. TX TYPE Set the fax transmission mode. MEMORY TX: DIRECT TX: Send the original after the scanned data are saved in the memory. Up to 100 transmissions of up to 1000 pages per 1 transmission can be reserved. Send the original directly as it is being scanned. Once a page has been scanned and sent, the next page is scanned and sent. Therefore, it takes longer to scan and send all pages. However, you can confirm on the fly that each page is sent to the recipient. ORIGINAL MODE Set the scanning mode based on the type of the original. TEXT: TEXT/ PHOTO: PHOTO: This is suitable for an original with text and line drawings. This is suitable for an original with a mixture of text and photos. This is suitable for an original with photos. Memo • In the TEXT/PHOTO mode or PHOTO mode, transmission time may be longer than that in the TEXT mode. - 64 -