Oki MC770 MC770/780 User Guide - Basic - Page 71

2 Press [SEND]. 3 Check the fax image after the preview is displayed. Press [OK] if you send it without any change. The fax will then be sent. • To send another original, place it on the original glass or RADF (Reversing Automatic Document Feeder), and then press the [START] button on the control panel. • To delete the page being previewed, press [DELETE PAGE]. • To replace the page being previewed with another page, press [REPLACE PAGE]. • To insert another scan before the page being previewed, press [INSERT PAGE]. • Press [OPTION] to change the setting.  P.64 "Setting the transmission conditions" SENDING/RECEIVING A FAX Receiving a Fax Reception mode This section describes how to receive a fax. Refer to the appropriate section for your current reception mode. The reception mode can be set on the ADMIN menu. For details of the current setting, ask your administrator. Besides the receiving methods described in this page, there are various useful ways to receive a fax. These procedures are described in the following Guide. 1  Advanced Guide  AUTO reception Faxes are automatically received during an incoming call. Users do not have to do anything when receiving a fax. 2  MANUAL reception Faxes are manually received by using an external telephone when you have an incoming call. 1 Pick up the handset of the external telephone when you have an incoming call. If the incoming call is a telephone call, you can start talking. 3 2 If you hear a tone (fax signal) through the handset of the external telephone, press the [FAX] button on the control panel.  P.60 "Basic procedures" 3 Press the [ADVANCED] tab, and then press [MANUAL RECEIVE]. 4 5 4 When a message appears indicating that you can send a fax, press the [START] button on the control panel and replace the 6 handset of the external telephone. - 71 -