Oki MC770 MC770/780 User Guide - Basic - Page 56
Making a 2-sided copy, Performing Copy & File
View all Oki MC770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
BASIC COPY MODES 4 Select the desired mode, and then press [OK]. [1->1 SIMPLEX]: 1-sided original to 1-sided copy [2->1 SPLIT]: 2-sided original to 1-sided copy 3 Press [2-SIDED] on the touch panel. 1 5 Select other copy modes as required, and then press the [START] button on the 2 control panel. 4 Select the desired mode, and then press [OK]. [1 -> 2 DUPLEX]: 1-sided original to 2-sided copy [2 -> 2 DUPLEX]: 2-sided original to 2- sided copy Making a 2-sided copy Memo 3 • If 1-sided portrait originals have been placed in a landscape direction and you copy them on both sides of the paper, copied sheets are usually in the open to top/bottom direction. You can make copies in the open to left/right direction with the image direction function. 4 5 6 1 Place paper in the tray(s). When using bypass copying, be sure to set the paper size. 2 Place the original(s). 5 Select other copy modes as required, and then press the [START] button on the control panel. When placing the original on the original glass, follow steps 6 and 7 on P.31 "Basic copying procedure". Performing Copy & File With the Copy & File function, you can store the copied data in the share folder of the hard disk of this equipment or a specified PC on a network. The data can be stored in any of PDF, TIFF and XPS formats. Note • The data will be stored as black images. (Resolution: 600 dpi only) The data stored with this function are suited for printing but not for being imported as an image into your PC. To obtain the optimal image quality for importing, it is recommended to store the data with the Scan to File function of this equipment. • The network administrator must make settings for Copy & File in advance. For details, refer to the TopAccess Guide. • It is recommended to back up the data stored in the share folder. - 56 -