Oki OF5800 Service Guide - Page 150
The values FF, AA, 55, and 00 are written to, then read from, memory. The results are show in
View all Oki OF5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Service Manual for OF5800 Chapter 3 Adjustment Procedures Page: 131 This mode is used to test the SRAM memory where user programmed parameters such as date, time, TTI, etc are stored. Note: When this test is executed, an All RAM Clear will be performed by the unit. The All RAM Clear erases all user settings and resets all memory switches, machine parameters and unique switches to factory defaults. 1. Press PROGRAM, *, B. Then press E. The values FF, AA, 55, and 00 are written to, then read from, memory. The results are show in the display. If the read/write test is successful, the display will show "OK" after each value. If some portion of the read/write test fails the display will show "NG" after the failed value. 2. Upon completion, the unit will return to the standby mode. Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)