Oki OF5800 Service Guide - Page 70
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See
![]() |
View all Oki OF5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Service Manual for OF5800 Chapter 3 Adjustment Procedures Page: 57 These switches are used to program internal machine parameters. The primary back up battery maintains these settings if power is lost. 1. From standby, press PROGRAM, *, 1. 2. Press ENTER. 3. Select the desired parameter by pressing a one-touch key plus a number on the keypad. For example, to access memory switch B:1, press "B" plus the number "1" on the numeric keypad. 4. Press ENTER. (The bits are numbered 7 through 0. Bit 7 is left most bit.) 5. To navigate through the Parameter settings: Press "" key to move the cursor to the right. Press the 0 or 1 on the numeric keypad to change the bit value. Press ENTER to save the setting of the displayed Parameter and advance to the next Parameter. (Continue pressing ENTER until the desired Parameter is shown in the display. Be sure to press ENTER after each Parameter is programmed to save the new setting.) Press Stop to return the unit to standby. Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
![](/manual_guide/products/oki-data-of5800-service-guide-82947a4/70.png)