Oki OF5800 Service Guide - Page 33
on the main control PC board encode the image data and send it to the modem where it is modulated.
![]() |
View all Oki OF5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Service Manual for OF5800 Chapter 2 Machine Operations Page: 22 When the document reaches the scan wait position, the machine waits for the next command. It will start scanning the document when either the start or copy key is pressed. The light from the scanner lamp strikes the face of the document and is reflected into the lens through mirrors A, B, and C. In case the light intensity along the length of the scanner lamp is not uniform, shading compensation is provided to ensure even illumination. As the reflected image passes through the lens, it is focused onto the charged coupled device(CCD). The CCD then converts the dark and light areas of the image into electrical impulses, or image data. Circuits on the main control PC board encode the image data and send it to the modem where it is modulated. The modulated signal is then placed onto the telephone line by the NCU. When DS2 detects the trailing edge of the document, the image signal output is turned off. The scanner continues to remain active for a few more seconds in case there is another document to follow. Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
![](/manual_guide/products/oki-data-of5800-service-guide-82947a4/33.png)