Oki OF5800 Service Guide - Page 175
White Black Line
View all Oki OF5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Uneven print density Irregularities White (Black) Line The toner may be unevenly distributed inside the toner cartridge. Remove the cartridge from the printer and shake it a few times to redistribute the toner inside. Verify operation of the drum cartridge. Check for moisture on the drum surface. If moisture is found, allow the drum to dry. Verify that a clear image is being placed on the drum by printing a document and opening the printer cover before the document completes printing. At this point remove the drum and check for a clear image on the drum. If there is a clear image on the drum, the problem could be caused by poor image transfer. Replace the image transfer unit and/or the high voltage power supply and/or the printer mechanical controller. If the image is poor on the drum, replace the drum and/or print head. Insure that the paper being used in the unit is dry and has not been exposed to excessive moisture. Verify that a clear image is being placed on the drum by printing a document and opening the printer cover before the document completes printing. At this point remove the drum and check for a clear image on the drum. If there is a clear image on the drum, the problem could be caused by poor image transfer. Replace the image transfer unit and/or the high voltage power supply and/or the main control board. If the image is poor on the drum, replace the drum and/or print head. Clean contact glass if problem occurs in copy mode. Remove and check the drum and toner cartridge for damage. If required, replace the drum or toner cartridge. Verify that a clear image is being placed on the drum by printing a document and opening the printer cover before the document completes printing. At this point, remove the drum and check for a clear image on the drum. If there is a clear image on the drum, the problem could be caused by poor image transfer. Replace the image transfer unit and/or the main control board. If the image is not clear, replace the print head and/or the drum. Check the fuser roller for damage. If found, replace the fuser unit.