Olympus E-100RS E-100RS Instructions (English) - Page 123

Compensating for image blur-Stabilization system When you take pictures with at wide-angle or telephoto, camera shake is more likely to affect the picture, causing image blur. If this happens to you, you can compensate for camera shake with the camera shake prevention feature. Under some conditions, may not work effectively. • When the camera angle is changed very quickly • Night-scene recording 1 Press to display Menu. 2 3, 4 2 Press select on the Arrow pad to , then press . Press to select ON, then press the OK button. ● To go back to the normal screen, press the OK button again. The setting is stored. 3 Press the Shutter button halfway. ● It takes about for 1 sec. to stabilize the image after setting. Check the image on the screen. 21 7 4 Press the Shutter button all the way down. ● This mode does not work effectively if you P F2.8 1/800 0.0 press the Shutter button all the way down soon after pressing it halfway down. OFF ● If the shutter speed is low (p.110), this mode does not function. ● Since the Stabilization system remains AF MODE FULL-TIME AF ON activated for approx. 2 sec. after a picture is taken, you do not have to wait until the image is stabilized during Sequential shooting. [SM] [ 3 / 5 ] Menu (still picture recording mode) ૽૽This mode is not suitable in the following cases ●When using a tripod. ●When using a cinepanhead ●When using a conversion lens Control panel Stabilization system 123