Olympus E-100RS E-100RS Instructions (English) - Page 201
Symptom, Possible Causes, Corrective Action, Ref.
View all Olympus E-100RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
SYMPTOM No picture is taken when the Shutter button is pressed. POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE 4 The card is full. 5 The batteries ran out. 6 Indications disappear on the viewfinder/monitor or the control panel. On the control panel, the battery remaining power indicator will blink. 7 The memory gauge is full. 8 A write-protect adhesive seal is placed on the card or there is no card in the camera. 9 The Mode dial is set to . 4 Replace the card, delete unwanted pictures or transfer the data to a computer and delete all of the pictures. 5 Replace the batteries with new ones. 6 Replace the batteries with new ones. (Do not open the Battery compartment cover when the Card access lamp is blinking.) 7 Wait until there is room in the memory gauge. 8 Insert a new card in the camera. 9 Set the mode dial to P, A, S, M, S-Prg or . P. 40-42 P. 78 P. 180-189 P. 33 P. 33 P. 69 P. 40 P. 41 P. 44 SYMPTOM The date recorded with the image data is wrong. POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE 1 The date was not set. 1 Set the date. It is also P. 54 possible to set the date via a personal computer using CAMEDIA Master. The clock adjustment is not factory- preset. 2The camera has been 2 Try setting the date again. P. 54 left for approx. 1 week with the batteries removed and the date setting is canceled. 12 201