Olympus E-100RS E-100RS Instructions (English) - Page 62

Pre-recording check Checking the batteries When the power is turned on, the Control panel 2 remaining battery power will be displayed on the control panel. If it is low, please replace the batteries. If your batteries are either NiMH or NiCd, please charge them when their power is low. Battery check lights and turns off automatically. The batteries are OK. You are ready to take pictures. blinks and other indicators on the control panel are displayed normally. The battery power is low and the batteries should be replaced. You can shoot with the remaining power, but the batteries may die soon. blinks and then turns off after 12 seconds. Other indicators on the control also go out. The batteries are dead and should be replaced immediately. Note: ● The timing of each battery level indicator varies depending on the type of batteries used. ● When the camera is being operated on batteries that are running low, the camera may emit several short beeps and blink the number of storable pictures on the control panel after you take a shot or when you turn on the power. If this happens, the picture you have just taken will not turn out properly. Replace the batteries and take the picture again. 62