Olympus E-100RS E-100RS Instructions (English) - Page 203
Image rotate, Image protect, Single-erase, All-frame erase and Card
View all Olympus E-100RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
SYMPTOM The monitor is not clear. POSSIBLE CAUSES 1 The brightness is not adjusted properly. 2 The monitor is exposed to direct sunlight. CORRECTIVE ACTION 1 Adjust the brightness. 2 Block the sunlight. REF. PAGE P. 163 SYMPTOM Image rotate, Image protect, Single-erase, All-frame erase and Card formatting cannot be performed. POSSIBLE CAUSES 1 A write-protect adhesive seal is affixed to the card. CORRECTIVE ACTION 1 Use the card after peeling off the seal. Do not reuse the write protect seal. REF. PAGE P. 43 SYMPTOM When the camera is connected to a computer, an error message appears while data is being transferred to the computer. POSSIBLE CAUSES 1 The cable is not plugged in correctly. 2 The power is OFF. 3 The batteries are exhausted. 4 The USB driver is not installed properly. CORRECTIVE ACTION 1 Connect the cable correctly. 2 Turn on the camera, then set the Mode dial to . 3 Replace the batteries with new ones or use the optional AC adapter. 4 Check the USB driver's installation guide, and make sure the camera is recognized. REF. PAGE P. 182-187 P. 187 P. 33-38 12 203