Olympus E-100RS E-100RS Instructions (English) - Page 98

Taking pictures using the remote control (Cont.) 2 Compose the picture, aim the remote control at the remote control receiver on the camera, then press the shutter button on the remote control to take the picture. ● The self-timer lamp will blink. 3 When the mode dial is set to P, A, S, M, or S-Prg... 4 Press the shutter button on the remote control. ● The self-timer lamp will blink and the shutter will be released in approx. 3 seconds. 15° 9.8ft 15° 9.8ft 16.4ft When the mode dial is set to (movie), press the shutter button on the remote control. ● The self-timer lamp will blink and the shutter will be released in approx. 2 seconds. Recording will then start. To stop recording, press the shutter button. The card will then begin storing the picture data taken so far. ૽૽When the remote control does not work ● If the self-timer lamp does not blink when the shutter button on the remote control is pressed, get closer to the camera and try it again. ● If the self-timer lamp does not blink, there may be frequency interference. Change the remote control's frequency according to its instruction manual. Self-timer lamp Remote control receiver Note: ● Working distance may be reduced in brightly lit areas, such as direct sunlight. ● Do not expose the remote control receiver to bright light. ● The self-timer/remote control mode will not be cancelled when shooting is finished. 98