Olympus E-100RS E-100RS Instructions (English) - Page 202
Troubleshooting Cont.
View all Olympus E-100RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Troubleshooting (Cont.) SYMPTOM The flash does not fire. POSSIBLE CAUSES 1 The flash is pushed down. 2 The subject is lighted. 3 The drive mode is set to . CORRECTIVE ACTION REF. PAGE 1 Slide the Flash switch to raise P. 72 the flash. P. 108 2 Set the flash to Fill-In mode. P. 107/108 3 Press the DRIVE button to set P. 117 to the single-picture mode. SYMPTOM Pictures you have already taken do not appear on the monitor. POSSIBLE CAUSES 1 The camera is in the Record Mode. 2 There is no picture in the card. 3 There is a problem with the card. 4 The camera is connected to a TV. 5 The viewfinder is on but there is no display. CORRECTIVE ACTION 1 Set the Mode dial to . 2 NO PICTURE appears on the monitor. Record pictures. 3 See the Error code chart. 4 The monitor does not function when the camera is connected to a TV. 5 Press to switch to the monitor. REF. PAGE P. 44 P. 124 P. 68-70 P. 203 P. 204 P. 76 P. 124 SYMPTOM The viewfinder display is not clear. POSSIBLE CAUSES CORRECTIVE ACTION 1 The diopter is not adjusted properly. 2 The brightness is not adjusted properly. 1 Adjust the diopter again. 2 Adjust the brightness. It is possible to adjust the viewfinder and monitor independently. 12 REF. PAGE P. 64 P. 163 202