Onkyo HT-S7800 Owners Manual - English - Page 14

> Before start > Hookup > Setup > Playback > Part Names Basic Playback > Advanced Manual Troubleshooting | Appendix a d b c 14 AV Component Playback 1. Switch the input on the TV to that assigned to the unit. 2. Press the input selector (a) on the remote controller with the same name as the jack to which you connected the player to switch the input. For example, press BD/DVD to play the player connected to the BD/DVD jack. Press TV to listen the TV's sound. 0 When the CEC link function works, the input switches automatically when you have connected a CEC compliant TV and player to this unit using HDMI connection. 3. Start play on the player. 4. Use VOL+/- (b) to adjust the volume. When a TV is connected to the HDMI OUT SUB jack Press Q on the remote controller to display the Quick Menu, and set "Other" - "HDMI Out" to either "SUB" or "MAIN+SUB". Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by repeatedly pressing the MOVIE/TV, MUSIC, and GAME buttons (c). For details on the listening modes, see the Advanced Manual. This section introduces some of the popular modes. Dolby Digital/DTS modes When the input signal is a digital surround format such as Dolby Digital or DTS, you can select the listening mode that suits the input signal. Dolby Digital is displayed for Dolby Digital and DTS-HD Master Audio is displayed for DTS-HD Master Audio. The output is Stereo for 2-channel input signals. Direct This listening mode can be selected for all input signals. It shuts down processing that affects sound quality to deliver a playback sound quality closer to sources. Speakers play the sound field according to the number of channels in the input signal, so there would be output from only the front speakers for a 2 ch signal, for example. Dolby Surround/DTS Neural:X These listening modes allow you to expand the playback signal to 5.1 channels or 7.1 channels to suit the connected speaker configuration when the input signal is 2 channels or 5.1 channels. 0 We plan to provide support for the DTS Neural:X a firmware update for this unit. You can select Neo:6 Cinema and Neo:6 Music until the update. Original surround modes You can select listening modes such as the All Ch Stereo mode where a stereo image is played from both the front and the rear, and Orchestra (only with the MUSIC button) which is best for playback of classical and opera pieces. Pure Audio (Australian and Asian models) Listening mode that provides purer sound quality by switching off the power of the display and analog video circuits. The listening mode last selected for the source is remembered for each of the MOVIE/TV, MUSIC, and GAME buttons. If content you play is not supported by the listening mode you selected last, the listening mode that is standard for that content is selected automatically. Press (d) repeatedly to switch the display of the main unit in order of: Input source & volume Listening mode Signal format The display changes few seconds later. Sampling frequency Input signal resolution Playback