Onkyo HT-S7800 Owners Manual - English - Page 20

> Before start > Hookup > Setup > Playback > Part Names Rear Panel 1 23 4 56 7 8 9 > Advanced Manual Troubleshooting | Appendix 10 9 90° 180° 11 12 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. TUNER AM/FM 75Ω terminal: The supplied antennas are connected. 3. VIDEO IN jacks: Input the video signals from AV component with an analog video cable. 4. USB port: A USB storage device is connected so that music files stored in it can be played. You can also supply power (maximum 5V/1A) to USB devices with a USB cable. 5. ETHERNET port: Connect to the network with an Ethernet cable. 6. COMPONENT VIDEO IN jacks: Input the video signals from AV component with a component video cable. 20 13 14 15 7. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable connected to a monitor such as a TV or projector. 8. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to an AV component. 9. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their angles according to the connection status. 10.Power cord 11. GND terminal: The ground wire of the turntable is connected. 12.AUDIO IN jacks: Input TV or AV component audio signals with an analog audio cable. 13.SPEAKERS terminals: Connect speakers with speaker cables. You can connect the multichannel speakers for the main room and the speakers for a separate room (ZONE 2). (North American models are compatible with banana plugs.) 14.ZONE 2 LINE OUT jack: Output audio signals with an analog audio cable to a pre-main amplifier in a separate room (ZONE 2). (P10) 15.SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER PRE OUT jacks.