Onkyo HT-S7800 Owners Manual - English - Page 35
in Configuration - Zone Speaker and Zone 2, Surr Back Left
View all Onkyo HT-S7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix ˙ 3� Distance Set the distance from each speaker to the listening position. Setting Item Front Left Center Front Right Height Left Height Right Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer Default Value 12.0ft/3.60m 12.0ft/3.60m 12.0ft/3.60m 9.0ft/2.70m 9.0ft/2.70m 7.0ft/2.10m (7.0ft/2.10m) (7.0ft/2.10m) 7.0ft/2.10m 12.0ft/3.60m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Specify the distance between each speaker and the listening position. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Default values vary depending on the regions. • Distance units can be switched by pressing MODE on the remote controller. When the unit is set as feet, you can set between 0.1 ft and 30.0 ft in increments of 0.1ft. When the unit is set as meters, you can set between 0.03 m and 9.00 m in increments of 0.03 m. ˙ 4� Level Calibration Setting Item Front Left Center Front Right Height Left Height Right Surround Right Default Value 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB Setting Details Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. • The setting cannot be changed if "Zone 2" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Select a value between "-12 dB" and "+12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level. 11