Panasonic AG DVX100B Dvc Camcorder - Page 73

PLAYBACK FUNCTIONS screen Item/ (Display mode) Description of settings Item/ (Display mode) Description of settings 32K (12bit) AUDIO (VCR) Sets the sound to be output as CH1 and CH2 signals when playing back a tape that was recorded in the 32K (12bit) audio mode. ST1: Selects the sound that was recorded during shooting. CH1 signals = CH1 track CH2 signals = CH2 track ST2: Selects the sound that was dubbed on the recording. CH1 signals = CH3 track CH2 signals = CH4 track MIX: Mixes the sound that was recorded during shooting and the sound that was dubbed on the recording. CH1 signals = CH1 track + CH3 track CH2 signals = CH2 track + CH4 track Note When the sound is recorded in the 48K (16bit) audio mode, CH3 and CH4 do not exist so the following is always the case. CH1 signals = CH1 track CH2 signals = CH2 track AUDIO OUT (VCR) Sets the audio signals to be output from the AUDIO IN/OUT pin jack when the tape is played back. CH1•CH2: CH1 output = CH1 signals CH2 output = CH2 signals CH1: CH1 output = CH1 signals CCH2 output = CH1 signals CH2: CH1 output = CH2 signals CH2 output = CH2 signals are the factory settings. 32K (12bit) AUDIO item/AUDIO OUT item settings and audio track signals output from the AUDIO IN/ OUT jack Audio recording mode 32K (12bit) 32K (12bit) AUDIO item setting ST1 ST2 MIX AUDIO OUT item setting CH1•CH2 CH1 CH2 CH1•CH2 CH1 CH2 - AUDIO IN/OUT jack CH1 output CH1 CH1 CH2 AUDIO IN/OUT jack CH2 output CH2 CH1 CH2 CH3 CH3 CH4 CH4 CH3 CH4 CH1+CH3 CH2+CH4 48K (16bit) - CH1•CH2 CH1 CH2 CH1 CH1 CH2 CH2 CH1 CH2 Menus 73