Panasonic AG DVX100B Dvc Camcorder - Page 74
Recording Setup Screen, First Rec Tc
UPC - 791871302231
View all Panasonic AG DVX100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Setup menu list (continued) RECORDING SETUP screen Item/ (Display mode) REC SPEED (camera) (VCR) AUDIO REC (camera) (VCR) MIC ALC (camera) MIC GAIN 1 (camera) MIC GAIN 2 (camera) 1394 TC REGEN (VCR) TC MODE (camera) (VCR) Description of settings Set the recording-time mode. SP: SP (standard) mode LP: LP (long) mode Set the audio recording mode for conversion to PCM audio. 32K (12bit): 12bit/21kHz 48K (16bit): 16bit/48kHz Sets microphone level auto control to ON or OFF. ON OFF Set this ON to reduce distortion at high input levels. • You should also adjust the input level with the AUDIO control whatever you set here. Sets the input level of the external microphone connected to the INPUT 1 terminal. -50dB -60dB Sets the input level of the external microphone connected to the INPUT 2 terminal. -50dB -60dB Selects the time code used when signals from equipment connected with the DV terminal is recorded. ON: Records with the time code signal input through the DV terminal. OFF: Records with the time code set at TC MODE/TCG/FIRST REC TC. • This setting has priority over any setting you have made in TC MODE/ TCG/FIRST REC TC. • If there is no input to the DV terminal, the setting follows the ones set at TC MODE/TCG/FIRST REC TC. Selects the correction mode of the internal time code generator. DF : Uses the drop frame mode. NDF : Uses the non-drop frame mode. • The non-drop frame mode will be used when you are shooting in a progressive mode, 24P or 24P (ADV). 74 Item/ (Display mode) TCG (camera) (VCR) FIRST REC TC (camera) (VCR) TC PRESET (camera) (VCR) 1394 UB REGEN (VCR) Description of settings Use this to set the mode in which to advance the time code. FREE RUN: The time code advances regardless of the operation mode. REC RUN: The time code advances only when recording. Select the time code to be recorded when you start recording. REGEN: Select to record the time code so that it continues from the time code already on the tape. PRESET: The time code does not continue from the time code on the tape. The value you set at TC PRESET is used as the initial value when recording the time code. The time code does continue on from the one on the tape, however, if you continue recording from something on the tape. Sets the initial time code. This is effective when you have select PRESET in FIRST REC TC. • Set the frame value to 0 or a multiple of 5 when you are shooting in a progressive mode, 24P or 24P (ADV). Using any other value will cause the time code to differ. Selects the user information used when signals from equipment connected with the DV terminal is recorded. ON: Records with the user information signal input through the DV terminal. OFF: Records the user information set with UB MODE. • If you select ON here, this has priority over the settings in UB MODE. • If the signal has no user information, the none is recorded. • If there is no signal being input through the DV terminal, then the UB MODE settings are used. is the factory setting.