Panasonic AG DVX100B Dvc Camcorder - Page 77
Other Functions Screen, Dv Cmd Sel
![]() |
UPC - 791871302231
View all Panasonic AG DVX100B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
OTHER FUNCTIONS screen Item/ (Display mode) REMOTE (camera) (VCR) DV CONTROL (camera) DV CMD SEL (camera) END SEARCH (camera) (VCR) Description of settings Sets the operations of the supplied remote control unit. (For settings on the remote control (Page 20) VCR1: Accepts commands from a remote control set to VCR1. VCR2: Accepts commands from a remote control set to VCR2. OFF: Operations are not accepted from any remote control. Sets the control method for backup recording with a backup unit connected to the DV connector. OFF: The backup unit is not controlled. EXT: The backup unit can be controlled by the START/STOP button. The images shot by the video camera are stored in the backup unit. Note that the video camera does not record them. BOTH: The images shot by the video camera are recorded by both the video camera and backup unit. CHAIN: When the video camera's tape approaches its end during shooting, the backup unit set in the recording stand-by mode automatically starts to record the images. Sets how the START/STOP button works for the backup unit. REC_P: The button works as a REC/REC PAUSE button. STOP: The button works as a REC/REC STOP button. Note If the backup unit does not have a rec pause function, select STOP. Sets the operation to be performed when a blank search is conducted. (Page 51) BLANK: REC END: Item/ (Display mode) REC LAMP (camera) BEEP SOUND (camera) Description of settings Sets lighting of the tally lamp. OFF: Tally lamp does not light. FRONT: Front tally lamp (microphone side) lights. REAR: Rear tally lamp (viewfinder side) lights. BOTH: Both tally lamps light. Selects ON/OFF for the beeps. ON OFF CLOCK SET (camera) (VCR) TIME SHIFT (camera) (VCR) Select ON to be warned by a beep in the following situations. • When a beep sounds, the audio signals from the OUT jack are muted and the beep is output instead. One beep • when you set the power switch to ON • when you start shooting Two beeps • when you pause shooting Three beeps • when you have set the cassette tape write-protect • when condensation has formed inside the camera-recorder • when a problem has occurred in the camera-recorder Ten beeps • when it is not possible to record to the tape Sets the camera-recorder's calendar. The time set using this item is added to the clock time of the internal calendar (time difference compensation) and displayed on the screen. The added time is also recorded on the tape. +23h - +1h, OFF, -1h - -23h (In 1-hour increments) are the factory settings. Menus 77
![](/manual_guide/products/panasonic-ag-dvx100b-dvc-camcorder-9a58220/77.png)