Panasonic SLPR300 SLPR300 User Guide - Page 20

PROGRAMMING PLAYBACK USING MAIN UNIT CONTROLS, Press the SET button to start program

Page 20 highlights

Listening to CDs Programming Playback Using Main Unit Controls It is possible to select your own program (order of tracks being played) using the program playback mode. Any of the tracks (1-99) on the CDs in the trays of the 3-CD changer can be selected. If you want to program and record tracks, see "Program Edit Recording" on page 30. 1 4,5 POWER COMPACT DISC RECORDER SL-PR300 PHONES MIN MAX PLAY MODE CD EDIT CD REC DISC 3 DISC 2 DISC 1 OPEN / CLOSE DISC SELECTOR 3 2 1 OPEN / CLOSE MULTI JOG REC LEVEL - + DIGITAL CD LINE REC SELECTOR SYNCHRO FINALIZE MENU SET CANCEL REC/ REC MUTE MIX BALANCE LINE CD 27 3,4,5 1 Load CDs into the trays of the 3-CD changer. • Only tracks on the CDs loaded in the 3-CD changer can be registered into the program. Note • To close a tray, press the 0 button for the tray number that is open. If you press the 0 button for a tray number other than that for the tray that is open, the program may not be played correctly. 2 Press the PLAY MODE button when the unit is in the CD stop mode. • The CD PLAYER indicator is shown in the display window, PROGRAM indicator is shown in the display window, and if no program has been registered, "PG NO PROGRAM" is shown in the information display. Program step number Disc source Track number 3 Press the SET button to start program registration. • The information display will show the following, and disc source columns will flash. Programming step number Disc source Track number 4 Select the disc source (CD tray) by turning the MULTI JOG control, and then press the SET button. MULTI JOG REC LEVEL SET - + 1. Select the disc. CD1 CD2 CD3 2. Enter the selection. • When the SET button is pressed, next the programming step and track number columns will flash. 5 Select and enter a track number (1-99) by turning the MULTI JOG control, and then press the SET button. MULTI JOG REC LEVEL SET - + 1. Select the track. 2. Enter the selection. • The following is an example of track 2 on the CD in tray DISC1 being entered as Step 01. • When the SET button is pressed, the programming of Step 01 is registered, and programming for Step 02 is ready. 6 Repeat steps 4 and 5 to program up to a maximum of 32 steps. • If you try to program over 32 steps, "MEMORY FULL" is shown in the information display, and the programming function ends automatically. • Pressing the CD Control STOP s button on the main unit ends the programming function.  RQT6087

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

RQT6087
Listening to CDs
It is possible to select your own program (order of tracks being
played) using the program playback mode. Any of the tracks (1-99)
on the CDs in the trays of the 3-CD changer can be selected.
If you want to program and record tracks, see
Program Edit
Recording
on page 30.
1
Load CDs into the trays of the
3-CD changer.
Only tracks on the CDs loaded in the 3-CD changer can be reg-
istered into the program.
Note
To close a tray, press the
0
button for the tray number that is
open. If you press the
0
button for a tray number other than that
for the tray that is open, the program may not be played correctly.
2
Press the PLAY MODE button when the unit is
in the CD stop mode.
The CD PLAYER indicator is shown in the display window,
PROGRAM indicator is shown in the display window, and if no
program has been registered,
PG NO PROGRAM
is shown in
the information display.
3
Press the SET button to start program
registration.
The information display will show the following, and disc
source columns will flash.
4
Select the disc source (CD tray) by turning the
MULTI JOG control, and then press the SET but-
ton.
When the SET button is pressed, next the programming step and
track number columns will flash.
5
Select and enter a track number (1-99) by
turning the MULTI JOG control, and then press
the SET button.
The following is an example of track 2 on the CD in tray DISC1
being entered as Step 01.
When the SET button is pressed, the programming of Step 01 is
registered, and programming for Step 02 is ready.
6
Repeat steps 4 and 5 to program up to a
maximum of 32 steps.
If you try to program over 32 steps,
MEMORY FULL
is
shown in the information display, and the programming func-
tion ends automatically.
Pressing the CD Control STOP
s
button on the main unit ends
the programming function.
Programming Playback Using
Main Unit Controls
MAX
MIN
PLAY MODE
PHONES
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
MULTI JOG
REC LEVEL
+
CANCEL
SET
MENU
REC/
REC MUTE
SYNCHRO
CD EDIT
CD REC
FINALIZE
LINE
CD
DIGITAL
POWER
COMPACT DISC RECORDER
SL-PR300
DISC
1
DISC
2
DISC
3
OPEN /
CLOSE
DISC
SELECTOR
3
2
1
LINE
CD
27
3,4,5
1
4,5
Program step
number
Disc source
Track number
Programming
step number
Disc source
Track number
MULTI JOG
REC LEVEL
+
SET
CD1
CD2
CD3
1. Select the disc.
2. Enter the selection.
MULTI JOG
REC LEVEL
+
SET
1. Select the track.
2. Enter the selection.