Panasonic SLPR300 SLPR300 User Guide - Page 35

Recording onto CD-R/RW Discs • Select "CD + LINE" to mix and record a CD loaded in the 3-CD changer with the signals from an external source via the LINE IN terminal. 3 Press the 1 REC/REC MUTE button (main unit/ remote control) to put the CDR in the recording pause mode. • The remaining recording time on the disc is shown in the information display. 4 Press the MENU button (main unit/remote control) and use the MULTI JOG/REC LEVEL and MIX BALANCE controls to adjust the recording level and mixing balance while playing the two sources. . MULTI JOG REC LEVEL - + MIX BALANCE MIX BALANCE LINE CD LINE CD CD recording level is Line input recording reduced. level is reduced. • Adjust the recording level so that the 0 dB display of the level meter is not exceeded when the highest signal is applied. • The pitch controls may be used to adjust the speed of CD playback for mixing and recording purposes. • When you have finished adjusting the recording level and the mix balance, set the sources back to the point where you want to start recording from. 5 Press the CDR Control PLAY p button on the main unit to start recording. 6 Start playback of the sources to be recorded. To stop recording at any time Press the CDR Control STOP s button on the main unit or the s (stop) button on the remote control. The Play p indicator in the display window will flash and operation stops. English !# RQT6087