Panasonic SLPR300 SLPR300 User Guide - Page 30

Recording onto CD-R/RW Discs When "ADD FINALIZE?" is shown in the information window: • No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote control) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc unfinalized. Notes • This message will be shown if the menu FINALIZE function setting is "ON". The default setting is "OFF". • When a blank disc is in the CDR tray, "UPDATE OPC" is shown following "ADD FINALIZE?". The recording process starts. • Only the tracks selected from the CDs in the 3-CD changer are recorded. • Playback starts from the first track selected. The playing time of the track and the remaining playing time of the CD-R or CDRW disc are shown in the information display. • As high-speed recording is performed (CD-R 4x, CD-RW 2x), there is no audio output during the recording process. When recording completes "STOP DUBBING" flashes and recording automatically stops. When recorded without canceling "ADD FINALIZE?" "FINALIZE" is shown in the information window after recording is stopped and finalization is automatically performed. To stop the recording at any time Press the CD Control STOP s or CDR Control STOP s button on the main unit or the s (stop) button on the remote control to stop the recording process. The recording mode is released after "STOP DUBBING" is shown in the information display. Notes • There is no need to adjust the recording level when recording a digital signal. • The last program information (the most recently created pro- gram still stored in the unit's memory) will be erased if the trays of the 3-CD changer are opened. Program Edit Recording This type of recording allows you to make a program of your favor- ite tracks on any of the CDs loaded in the 3-CD changer in any order you like. 3 1 4,5 2 4,5 POWER COMPACT DISC RECORDER SL-PR300 PHONES MIN MAX PLAY MODE CD EDIT CD REC DISC 3 DISC 2 DISC 1 OPEN / CLOSE DISC SELECTOR 3 2 1 OPEN / CLOSE MULTI JOG REC LEVEL - + DIGITAL CD LINE REC SELECTOR SYNCHRO FINALIZE MENU SET CANCEL REC/ REC MUTE MIX BALANCE LINE CD 4,5 DISC SELECTOR CD1 CD2 CD3 CD REC CD EDIT FINALIZE DISPLAY 1 2 3 4 5 6 7 8 9 0 PLAY MODE >_10 CONTROL REPEAT CD CD-R/RW •REC REC MUTE FADE SYNCHRO 7 CANCEL 3 7 RSEECLECTOR PITCH+ SET PITCH 0 PITCH- MENU CANCEL CANCEL COMPACT DISC RECORDER RAK-PR300 1 Load CDs in the 3-CD changer. Note • To close a tray, press the 0 button for the tray number that is open. If you press the 0 button for a tray number other than that for the tray that is open, the program may not be played correctly. 2 Load a recordable CD-R or CD-RW disc in the CDR tray. • The disc is read. 3 Press the CD EDIT button (main unit/remote control) twice to select the Program Edit mode. Main Unit Remote Control CD EDIT CD EDIT ! RQT6087 • The unit may be required to read the TOC (Table of Contents) of the CDs loaded in the 3-CD changer. If this is done, "TOC READING" is shown in the information display.