Panasonic SLPR300 SLPR300 User Guide - Page 41

English Setting the Clock 2,4,6 POWER COMPACT DISC RECORDER SL-PR300 PHONES MIN MAX PLAY MODE CD EDIT CD REC DISC 3 DISC 2 DISC 1 OPEN / CLOSE DISC SELECTOR 3 2 1 OPEN / CLOSE MULTI JOG REC LEVEL - + DIGITAL CD LINE REC SELECTOR SYNCHRO FINALIZE MENU SET CANCEL REC/ REC MUTE MIX BALANCE LINE CD 1 3,5,7 CANCEL Set the clock immediately after turning on the power to the main unit for the first time. Additionally, should there be a power blackout that lasts for longer than a few seconds, or if the AC power cord of the unit is unplugged from the wall socket for longer than a few seconds, please check to see if the clock needs to be reset again before using any other operation. • This unit uses a 12-hour clock to indicate time. • Adjust the clock regularly to maintain accuracy. The time can be set regardless of the unit's power switch being turned on or off. Example Setting the time to 1:15 PM when first using the system. 5 Press the SET button (main unit). MULTI JOG REC LEVEL SET - + Time backward Time forward Turn the MULTI JOG control Press the SET button. until "PM 1:00" is displayed. The hour column stops flashing and the minutes column starts flashing. 6 Turn the MULTI JOG control on the main unit until the minutes column reads "15". 7 Press the SET button. MULTI JOG REC LEVEL SET - + Time backward Time forward Turn the MULTI JOG control Press the SET button. until "PM 1:15" is displayed. "PM 1:15" is displayed. (When the time is to be reset, the present time will flash.) In case of the power on mode 1 Press the MENU button (main unit) while the unit is in the stop mode. If the time has not been set, the system will go directly to the "XX HH:MM" setting (shown in the information display), bypassing the timer settings. (The only commands that the unit accepts at this time are the MENU, SET and JOG control functions. Pressing of any other button such as CD Control button, CDR Control button or the or CANCEL buttons will end the setting mode.) 2 Turn the MULTI JOG to select "CLOCK/TIMER". 3 Press the SET button. 4 Turn the MULTI JOG control on the main unit the hour column reads "PM 1". In case of the standby mode 1 Press the MENU button (main unit). 2 Follow the instructions for steps 4-7 above. • The current time "PM 1:15" is shown in the information display. • If the CANCEL button is pressed while setting the minutes column, the procedure returns to the previous step, and the hour column starts flashing. This is convenient for correcting the hour column. Ways to change or adjust the time display There are two different ways for accessing the time setting function in order to adjust the time. With the main unit in the standby mode, press the MENU button three times. - The present time is shown in the information dis- play. - Follow the instructions for steps 4-7 above. " RQT6087