Pantech Renue Manual - English - Page 21
Installing/Removing SIM card and battery, align the gold contacts on the battery end with - covers
View all Pantech Renue manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installing/Removing SIM card and battery 1. To remove the battery cover, slide it as shown right. 2. Insert the SIM card into the slot. The gold contacts of the SIM card should face down. Getting Started 3. Slide the connector of the battery into the notch located at the top of the unit. Insert (1) and press the lower side of the battery until you hear a click (2). Make sure you align the gold contacts on the battery end with the contacts on the phone. If the contacts on the battery are not properly aligned, the phone and the battery could be damaged. Correct Incorrect 21
21
Getting Started
Installing/Removing SIM card and battery
1.
To remove the battery cover, slide it as shown right.
2.
Insert the SIM card into the slot. The gold contacts of the
SIM card should face down.
3.
Slide the connector of the battery into the notch located
at the top of the unit. Insert (1) and press the lower side
of the battery until you hear a click (2). Make sure you
align the gold contacts on the battery end with the
contacts on the phone. If the contacts on the battery are
not properly aligned, the phone and the battery could be
damaged.
Correct
Incorrect