Pentax PZ-10 PZ-10 Manual - Page 63
Snoidni111vn011100v
View all Pentax PZ-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Symptoms Built-in flash does not charge. The [ .4. ] indicator in the viewfinder is blinking in the Programmed AE mode. I The or [ P ] indicator in the viewfinder is blinking. Zoom Clip mode can not be set. The Image Size Tracking mode can not be set. The power zoom does not work. While shooting, the zooming automatically operates. Causes The battery is dead. The subject is too dark or when shooting a backlit subject. The subject is too bright or too dark during Programmed AE or Metered Manual mode. The aperture is not set correctly in the Metered Manual mode. The lens is set at manual zoom. The auto zoom switch of the lens is set at [ P ]. The focus-mode switch of the camera is in the [ MF ] manual focus setting. The lens is set at manual zoom. The auto zoom switch of the lens is set at [ P ]. The lens is set at manual zoom. The built-in flash is being charged. The camera is in the Image Size Tracking mode. Remedies Replace the battery. Use of flash is recommended. Reference p.7 p.19 If the subject is too bright or too dark, use an ND filter or flash. If the aperture is set incor- rectly in the Metered Manual mode, adjust the aperture. 4, P' ''' Push the power zoom ring of the lens out forward until [POWER ZOOM] appears. Set the auto zoom switch of the lens to [ A ]. Set the focus-mode switch of the camera at [ AF ] autofocus setting. Push the power zoom ring of the lens out forward until [POWER ZOOM] appears. Set the auto zoom switch of the lens to [ A ]. 31 P„ P'''' P'3;1 P'"" Push the power zoom ring of the lens out forward until [POWER ZOOM] appears. p24 Wait until charging is completed. p.24 Clear the Image Size Tracking mode. _,-----'---' SNOIDNI111VN011100V