Pfaff creative stylist MN 110 Manual - Page 22

ATTACHING THE HOOP If the hoop is not correctly attached, it may affect the presser foot, damage the embroidery machine or it can cause personal injury. Before attaching the hoop, make sure there is sufficient thread inside of the bobbin. 1 • Align the left and right side by pushing both sides in simultaneously until the embroidery hoop locks in place. • Insert the embroidery hoop into the flat hoop support (1). • Push both sides of the hoop simultaneously into the flat hoop support until it clicks in place. • Make sure that the notch of the embroidery hoop connects securely to the dowels on the flat hoop support (2). 2 REMOVING THE HOOP • Hold around the hoop and flat hoop support as illustrated. • At the same time, push the levers of the flat hoop support down and the hoop upwards. • Pull the hoop towards you and remove it from the flat hoop support. 22 - PREPARATIONS