Pfaff creative stylist MN 110 Manual - Page 35
Selecting The Color Sequence, Color Change Mode
View all Pfaff creative stylist MN 110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
SELECTING THE COLOR SEQUENCE 1. Press the color sequence icon. 1 2. Locate and select the desired color (2). -Select the colors according to the color stop sequence 2 identified in the embroidery software/run sheet. -The first box will display in color. 3. Press the needle selection number (3). 3 Note: Print the color analysis/color film sheet from the embroidery software, in order to know the color sequence of the design. 4. Repeat step two (2) until all colors and needle selections have been made. 5. Press the OK button. • You will be taken back to the home screen. COLOR CHANGE MODE The machine has three (3) color change modes. The color change modes allow for a fully automatic (A/A), semi-automatic (A/M) or manual (M/M) process. Color changes take place according to the color sequence selections made for the design. • A/A is for fully automatic mode - this is the default selection (4). In automatic mode, there will be no stops between color 4 changes. • A/M is for semi-automatic mode (5). Here, the embroidery machine will stop upon completion of each color stop. Press the Start/Stop button to resume. 5 • M/M is for manual mode (6). Here, the embroidery machine will stop upon completion of each color stop. This option is to be used along with needle selection. 6 HOW TO SWITCH TO COLOR CHANGE MODE 1. Press the color sequence icon (7). 2. Locate the color change mode icon. 3. Press the color change mode icon once to change the mode 7 from the default fully automatic mode to semi-automatic, or press the color change mode icon twice to change to the manual mode (8) . 8 4. Press the OK button. You will be taken back to the home screen. COLOR TOUCH SCREEN - 35