Pfaff creative stylist MN 110 Manual - Page 41

HOW TO ABORT A JOB This function is used to abort an embroidery job in process. This process terminates the entire job. 1. Press the origin (1) icon. The following message will prompt, "Terminate embroidery and return to the origin?" 1 2. Click OK. The frame will move to a center position and the design will reset. HOW TO ADJUST SPEED This function is used to adjust the speed of the stitches incrementally. The number displayed in red is the current speed of the embroidery machine. 1. Press the increments icon (2). 2 2. Press the plus (+) or minus (-) button (3). • If the increments button is displaying one (1) arrow, then the speed can be reduced or increased by 10 stitches per 3 minute. • If the increments button is displaying two (2) arrows, then the speed can be reduced or increased by 50 stitches per minute. HOW TO BRING THE HOOP OUT This function is used to bring the hoop from underneath the needles, so the embroidery is accessible to the user. This function is mostly used when doing appliques. 1. Press the hoop offset icon (4). The embroidery hoop will move from underneath the 4 needles. 2. Press the hoop offset icon (5). 5 The embroidery hoop will return the embroidery hoop back into position. COLOR TOUCH SCREEN - 41