Pfaff creative stylist MN 110 Manual - Page 44

MAINTENANCE AND CARE This is the most important maintenance that needs to be completed. Repeat the following process every time before using your embroidery machine to make sure the embroidery machine runs smoothly. Wipe down the outer surface with a soft cloth and clean the bobbin with the toolkit brush. Use sewing machine oil ONLY for lubrication points (included in the toolbox). White lithium grease can be found at any hardware store. It does not come in your toolbox. ROTARY HOOK Apply lubrication oil to the rotary hook every third to fourth hours when in constant use, but first turn off the embroidery machine and unplug it from the electrical outlet. 1 • Remove the bobbin. • Add two to three drops of embroidery machine oil to the rotary hook (1). • Replace the bobbin. 2 MACHINE HEAD Use white lithium grease every five months • on the metal wheels (2) • on the bottom metal bar (3) (both are located behind the machines head) Repeat the process on each side of the machine's head, using the manual needle switch display icon on your panel to needle #1, then to needle #10. • Needle switch display icon 3 LEVER ARMS Apply a few drops of lubrication oil to the lever arms (4) every week of continuous use. Do not drop on all ten arms at the same occasion. The oil will spread. 4 44 - MAINTENANCE & CARE