Pfaff creative stylist MN 110 Manual - Page 7

IMPORTANT - BEFORE GETTING STARTED • Make sure the temperature of the environment surrounding the machine is in between the 40°F - 104°F (5°C - 40°C). • In the case of lightning, make sure to turn-off the embroidery machine • Set up the embroidery machine near an electrical outlet. • Keep the machine free of dust. • Wear glasses and gloves when lubricating the embroidery machine. • Do not block the ventilation of the embroidery machine. • Make sure the embroidery machine is not in direct sunlight. • Set the embroidery machine two inches (2") away from the wall. • Do not keep liquid near the embroidery machine. • Lift the embroidery machine with at least two people. • Make sure all packaging materials have been removed. • Lift the embroidery machine from he bottom - ONLY. • Make sure all base feet are at the same height. • Make sure all base feet are locked. • Exercise caution when removing parts. • Do not plug the embroidery machine into the socket until the machine is set-up and ready to begin. • Make sure there are no objects underneath the embroidery machine • Make sure there are no objects within the moving range of the embroidery machine. • Set the embroidery machine on a leveled, balanced and durable surface. QUICK REFERENCE GUIDE/CHECKLIST Before embroidery machine operation, please confirm the following steps have been performed. Step 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Operation Important: Before getting started Threading of top thread Check thread tension Bobbin in the rotary hook Turning on the machine Importing a design Select embroidery design Select embroidery hoop Hoop fabric Attach embroidery hoop onto the embroidery machine Check embroidery area Start embroidery Remove embroidery hoop and fabric Turning off Reference page 7 18 26 16-17 13 33 34 34 23 22 36 42 22 13 INTRODUCTION - 7