Pioneer PDP-5016HD Owner's Manual - Page 24

08 Tuner Setup Setting up TV channels This section describes how to search and set up TV channels that you can watch under the current conditions. Unless you set up TV channels using Scan Channels, you may not be able to tune in any channels. 3 Press the c or d button to move to Scan Analog Channel, then press the OK button. Tuner Setup Scan Channels Scan Analog Channel Scan Digital Channel Edit Channel List Scanning Channels Automatically Scan Channels automatically searches and sets up TV channels. 1 Press the MENU button. 2 Press the c or d button to move to Tuner Setup, then press the OK button. Tuner Setup Scan Channels Scan Analog Channel Scan Digital Channel Edit Channel List 4 Move to Channel by pressing the c or d button and select the channel number by pressing the [ or \ button. Scan Analog Channel Band Air Channel 2 Name Channel Fine Tune Store 3 Select Scan Channels and press the OK button. 4 Select Analog Channel Band. 5 Press the [ or \ button to select the required signal source (Air or Cable). 6 Press the c or d button to select Digital Channel Band. 7 Press the [ or \ button to select the required signal source (Air or Cable). 8 Move to Start by pressing the c or d button and start the search by pressing the OK button. Scan Channels 70% ATV Found CH : 0 DTV Found CH : 0 Back / OK Stop • Scanning starts. The scanned channels are automatically stored in order. To stop scanning, press the OK button. 9 When finished scanning, press the EXIT button. • When using the Cable Converter, you may need to manually add Cable Converter output channels. Setting up Analog Channels Manually This section describes how to manually set up Analog channels. 1 Press the MENU button. 2 Press the c or d button to move to Tuner Setup, then press the OK button. 5 Press the c or d button to move to Store, then press the OK button. 6 If you want to edit the channel name, press the c or d button to move to Name Channel, then press the OK button. Scan Analog Channel Band Air Channel 0 Name Channel Fine Tune Store 7 Press the c or d button to select a letter (A~Z, a~z), a number (0~9) or a symbol (space, {I Move to the previous or next letter by pressing the [ or \ button. 8 When you have finished entering the channel name, press the OK button. 9 Press the c or d button to move to Store, then press the OK button. 10 If you want to adjust the tuning, press the c or d button to move to Fine Tune, then press the [ or \ button to obtain good picture and sound quality. Scan Analog Channel Band Air Channel 0 Name Channel Fine Tune Store 11 Press the c or d button to move to Store, then press the OK button. 12 Press the EXIT button. 24 En