Pioneer VSX-55TXi Owner's Manual - Page 8
Installing the Receiver, Opening the Front Panel - remote control
View all Pioneer VSX-55TXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Before You Start Operating range of remote control unit The area in which you can use the remote control to operate the VSX-55TXi is fairly large. To use, point the remote control toward the remote sensor on the front panel of this unit while within the range shown below. Remote control may not function properly if: • There are obstacles between the remote control and the remote sensor. • Direct sunlight or fluorescent light is shining onto the remote sensor. • The receiver is located near a device emitting infrared rays. • Operated simultaneously with another remote control which uses infrared rays. Installing the Receiver CAUTION! • Do not cover this unit in any way, for example with a sheet or piece of cloth. This would prevent proper heat dispersal. • Do not any place object directly on top of this unit. This also would prevent proper heat dispersal. • Be sure to leave adequate ventilation space around the amp! When installing in a rack, shelf, etc., be sure to leave more than 8 inches of space above the receiver. 8 inches (20 cm) Receiver Opening the Front Panel To open the front panel push gently on the lower third of the panel with your finger. 8