Pioneer VSX-55TXi Owner's Manual - Page 82
Editing Remote Control Display Names
View all Pioneer VSX-55TXi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Using Other Functions Editing Remote Control Display Names Use this capability to rename the display on the remote control for different MULTI CONTROL buttons (DVD/LD, etc.). For example, you could change TV to DVD2. In this way you can personalize your system. This is similar to the feature on page 92 but that feature changes the display on the receiver. 1 Press the REMOTE SETUP for more than three seconds. The REMOTE SETUP menu appears on the remote display. 2 Use the buttons to select FUNCNAME and press ENTER. SELECT FUNCTION will flash in the display. 3 Press the MULTI CONTROL button for the component you want to rename. For example, TV 4 Use the buttons to select the letters and/or numbers you want to enter and use the buttons to move the cursor to the next position. Here are the possible letters/numbers. Memo: • To exit from the REMOTE SETUP mode at anytime press the REMOTE SETUP button. • The display will disappear after one minute or so if no new commands are entered. Press any button to wake up the remote and continue the process. ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 •(space) You can input up to eight letter/numbers. 5 When you're finished press ENTER, END will flash, press ENTER again. The COMPLETE appears in the display. 6 Go back to step 2 to input as many function names as you want. 7 Select EXIT and press ENTER. You will exit the REMOTE SETUP menu and return to normal operation. 82