Pioneer VSX81TXV Owner's Manual - Page 23

Controls and displays 04 Display 1 2 3 45 6 7 8 9 10 11 SIGNAL AUTO HDMI DIGITAL ANALOG L C R 2DIGITAL DTS SL S SR WMA9 Pro 96/24 SBL SB SBR LFE VIDEO CONV. V.SB DNR MIDNIGHT TUNED MULTI-ROOM DIALOGUE LOUDNESS STEREO OVER ATT Hi-bit/sampling TONE MONO HDMI [1] [2] 2 STPRREOALOMGICDIRENCeTo :6 THX ADV.SURROUND STEREO STANDARD SP AB SLEEP 12 13 14 15 16 17 dB SR+ 18 1 SIGNAL indicators Light to indicate the currently selected input signal. AUTO lights when the receiver is set to select the input signal automatically (page 29). 2 Program format indicators These change according to which channels are active in digital sources. L - Left front channel C - Center channel R - Right front channel SL - Left surround channel S - Surround channel (mono) SR - Right surround channel SBL - Left surround back channel SB - Surround back channel (mono) SBR - Right surround back channel LFE - Low frequency effects channel (the ((( ))) indicators light when an LFE signal is being input) 3 Digital format indicators Light when a signal encoded in the corresponding format is detected. 4 OVER / ATT OVER lights to indicate that the level of an analog source is too high. ATT lights when you use the attenuator (ANALOG ATT) to reduce it. 5 MULTI-ROOM Lights when the multi-room feature is active (page 53). 6 VIDEO CONV. Lights when digital video conversion is enabled (page 61). 7 V.SB Lights during Virtual surround back processing (page 29). 8 Sound processing indicators Light according to the active AV parameter(s) (page 61). 9 TUNER indicators TUNED - Lights when a broadcast is being received. STEREO - Lights when a stereo FM broadcast is being received in auto stereo mode. MONO - Lights when the mono mode is set using the MPX button. 10 HDMI connection indicators Light to indicate the HDMI input currently selected. 11 Master volume level 12 STREAM DIRECT Lights when Direct / Pure Direct is selected (page 28). 13 Speaker indicators Indicate the current speaker system, A and/or B (page 51). 14 Listening mode indicators THX - Lights when a Home THX mode is selected. ADV. SURROUND - Lights when an Advanced Surround mode has been selected. STEREO - Lights when stereo listening is switched on (see Listening in stereo on page 28). STANDARD - Lights when a Standard Surround mode is switched on (see Listening in surround sound on page 26). 15 SLEEP Lights when the receiver is in sleep mode (page 62). 16 Matrix decoding format indicators 2PRO LOGIC IIx - This lights to indicate 2Pro Logic II / 2Pro Logic IIx decoding (page 26). Neo:6 - When one of the Neo:6 modes of the receiver is on, this lights to indicate Neo:6 processing (page 26). 17 Character display Displays various system information. 18 SR+ Lights when the SR+ mode is switched on (page 56). 23 En