Pioneer VSX81TXV Owner's Manual - Page 32

06 Using the tuner Naming station presets For easier identification, you can name your station presets. 1 Choose the station preset you want to name. See Listening to station presets below for how to do this. 2 Press T.EDIT (TUNER EDIT). The display shows STATION NAME, then a blinking cursor at the first character position. 3 Input the name you want. Choose from the following characters for a name up to four characters long. ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789 space] • Use the ST / buttons (remote) to select characters. • Press ENTER to confirm a character. If no character is input, a space is input. • The name is stored when ENTER is pressed after choosing the fourth character. Tip • To erase a station name, simply repeat steps 1 to 3 and input four spaces instead of a name. • Once you have named a station preset, you can press DISP when listening to a station to switch the display between name and frequency. Listening to station presets You will need to have some presets stored to do this. See Saving station presets above if you haven't done this already. 1 Press TUNER to select the tuner. 2 Press CLASS to select the class in which the station is stored. Press repeatedly to cycle through classes A, B and C. 3 Press ST / to select the station preset you want. • You can also use the number buttons on the remote control to recall the station preset. 32 En