Ricoh 402054 Operating Instructions - Page 31
Using the Scanner only with the SCSI Connection
UPC - 026649020544
View all Ricoh 402054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Connecting to the Computer Note ❒ Press the Hard Reset Switch if you changed the SCSI ID while the power is ON. ⇒ p.34 "Using the Hard Reset Switch" Using the Scanner only with the SCSI Connection You can set the scanner to the SCSI synchronous transmission for high-speed data transfer and shorten the total scan time. The USB and the optional IEEE1394 2 connection cannot be used when the SCSI synchronous transmission is set. A Open the cover of the switch box on the lower left of the frontside of the scanner. ADC015S Note ❒ Push the knob of the cover to the left and pull the cover to open. B Set the DIP Switch No.2 to the OFF position. ADC079S SCSI synchronous transmission is enabled. Note ❒ Press the Hard Reset Switch if you changed the DIP Switch while the power is ON. ⇒ p.34 "Using the Hard Reset Switch" 27