Ricoh 402054 Operating Instructions - Page 33
Connecting with IEEE1394 Interface
UPC - 026649020544
View all Ricoh 402054 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
C Connect the USB cable to the USB connector. Connecting to the Computer 2 ADC022S D Connect the other side of the cable to the USB connector on your computer. Connecting with IEEE1394 Interface Note ❒ The optional IEEE1394 interface board is required. ❒ An IEEE1394 cable is packed to be used for the optional IEEE1394 interface board. ❒ An irregular operation might occur for the IEEE1394 interface board of some PC. Please use the recommended IEEE1394 interface board for your PC. As for the recommended boards, please ask you service representative. ❒ You can connect the scanner to three computers at the same time. One with a SCSI interface, and two with the optional IEEE1394 interface. Though, you cannot use the scanner at the same time from three computers. Interfaces are switched automatically when you use any one of the computers. A Open the cover of the switch box on the lower left of the frontside of the scanner. ADC015S Note ❒ Push the knob of the cover to the left and pull the cover to open. 29