Ricoh 402054 Operating Instructions - Page 70

When the Originals are Not Fed Correctly, When Scanning is Not Performed as Expected

Get Ricoh 402054 - IS 760 PDF manuals and user guides
UPC - 026649020544
View all Ricoh 402054 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Appendix When the Originals are Not Fed Correctly A Remove the originals from the ADF. B Lift the Pressure Panel or open the ADF cover. ADC048S Unusual conditions of the Original Table will be corrected. C Shutdown the Pressure Panel or the ADF cover. 6 Note ❒ When you shut the ADF cover, please confirm the two magnets are fixed on the magnet catch and the cover is closed tightly. When Scanning is Not Performed as Expected Condition The scanned image is dirty. The originals are damaged when fed to the ADF. Image is distorted or out of position. Possible Cause and Required Action • The Exposure Glass, the ADF Exposure Glass, Background panel, Feed roller or Original Roller is dirty. • Clean the Exposure Glass, the ADF Exposure Glass, Background panel, Feed roller or Original Roller. ⇒ p.71 "Cleaning" • Set the paper thickness changeover lever correctly or it may damage originals. Please confirm the lever and the paper thickness of the originals. When you scan the originals thicker than 128g/m2 (242.5bls), turn the changeover lever on your side (thick paper mode). • The original was moved while scanning. Do not move the original while scanning. • The original was not pressed flat against the exposure glass. Make sure that the original is pressed flat against the exposure glass. 66

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Appendix
66
6
When the Originals are Not Fed Correctly
A
Remove the originals from the ADF.
B
Lift the Pressure Panel or open the ADF cover.
Unusual conditions of the Original Table will be corrected.
C
Shutdown the Pressure Panel or the ADF cover.
Note
❒
When you shut the ADF cover, please confirm the two magnets are fixed
on the magnet catch and the cover is closed tightly.
When Scanning is Not Performed as Expected
Condition
Possible Cause and Required Action
The scanned image is dirty.
•
The Exposure Glass, the ADF Exposure
Glass, Background panel, Feed roller or
Original Roller is dirty.
•
Clean the Exposure Glass, the ADF Expo-
sure Glass, Background panel, Feed roller
or Original Roller.
⇒
p.71
“
Cleaning
”
The originals are damaged when fed to the
ADF.
•
Set the paper thickness changeover lever
correctly or it may damage originals.
Please confirm the lever and the paper
thickness of the originals. When you scan
the originals thicker than 128g/m
2
(242.5bls), turn the changeover lever on
your side (thick paper mode).
Image is distorted or out of position.
•
The original was moved while scanning.
Do not move the original while scanning.
•
The original was not pressed flat against
the exposure glass. Make sure that the orig-
inal is pressed flat against the exposure
glass.
ADC048S