Ricoh CL3500N Quick Installation Guide - Page 383

Making Printer Settings Using the Control Panel ❒ Spooling stores a sent print job temporarily in the printer, and then prints it. ❒ This menu appears only when the optional hard disk is installed. ❖ Letterhead Mode You can select the letterhead printing mode. • Off • Auto Detect • On (Always) ❒ Default: Off ❖ Bypass Priority When the different paper size or type is specified from the driver, you can specify which setting is given priority to, machine setting or command. • Machine • Driver/Command ❒ Default: Driver/Command ❖ RAM Disk If the optional hard disk is not installed for PDF Direct Print, select a value of 2 MB or higher. This menu appears only when the optional hard disk is not installed. • 0 MB • 2 MB • 4 MB • 8 MB • 16 MB ❒ Default: 4 MB ❒ When the amount of SDRAM is small and RAM Disk is set to 16 MB, printing may not be possible depending on the print job and duplex printing may be canceled. If this happens, increase the amount of SDRAM, or set RAM Disk to 8 MB or less. For details about the optional SDRAM module, see Setup Guide. ❖ Notify by Email You can specify whether or not to send an error message to a preset e-mail address when an error occurs in the printer. 143